home Home navigate_next More brands navigate_next 2in1 liquid adhesive/Auxiliary material
2in1 liquid adhesive/Auxiliary material
NT$0
Information

Used to bond and secure aquarium stone, driftwood, artificial live rock and other scenery materials.

Insert the auxiliary material into the gap between the materials that is uneven and has a small bonding area, and then apply adhesive to the material to firmly bond the material.

Details

Used for adhering and fixing stones, driftwood, artificial live rock, etc.
This product is inserted into the gap between materials with uneven surfaces and a narrow bonding area, and liquid adhesive is poured into the material to firmly bond it.
Cannot be used underwater.

 

Usage examples


Layout with stacked stones

Using adhesives greatly expands the range of expression and freedom of stonework.
You can make the stones more slanted, you can arrange them in ways that were physically impossible, and you can make them look more appealing by gluing them together.

 

 

Adhesion method

 

work process:

1. Insert the auxiliary material into the area to be bonded
2. Let the liquid adhesive soak between the auxiliary materials
3. Wait for some time until the adhesive hardens
4. Please make sure the adhesive part has hardened before putting it into water.

 

※As the adhesive hardens, the heat generated can produce some smoke and a pungent odor. Maintain adequate ventilation while working.

 

 

 

Precautions for use

This product has strong adhesion to the skin, please be careful not to touch it.
If it accidentally sticks to your skin, gently peel it off while loosening it in hot water.
If it gets into your eyes, wash your face immediately and seek medical advice. Do not rub or force it off.
Please keep it out of reach of children and pets.
Maintain adequate ventilation while working.
No fires.
After this product hardens, it is harmless to fish and aquatic plants. However, if you put it into an aquarium with delicate fish, aquatic plants, shrimps, and corals, please make sure that the adhesive part has completely hardened before adding it. Be very careful when doing this.
It is not suitable for forced bonding where the bonding surface is extremely small or where heavy loads are required.
Not for use in repairing glass aquariums or breeding equipment.
It may not be possible to bond materials with moss or slime, such as natural live rock.
Please store in a place away from direct sunlight, high temperature and moisture. Please note that depending on the storage environment, the quality may be affected even if the product is unopened.

×